Archive of older announcements
27.03.2013 » RobiFix-LOCK
Very fast, user-friendly and suitable for overhung locking or wall mounting - the new interlock system for RobiFix. Multi-Contact has developed a new standard for robot dress packs for spot welding. The RobiFix primary circuit connector provides power supply in the dress pack with single-core cables, and is particularly compact, installation-friendly and cost-effective. New accessory parts now round out the system and extend its possible applications.
RobiFix-LOCK
26.03.2013 » New product website: www.robifix.com
The new RobiFix website provides illustrative and detailed information on the concept, applications and technical specifications of the versatile, compact primary circuit connector. In the automotive industry RobiFix is becoming a new standard for the electrical connection of dresspacks, mainly on welding robots. The advantages are obvious: The compact, extra leightweight connector is user-friendly and easy to maintain, assembly times can be reduced by up to 50 percent.
New product website: www.robifix.com
21.02.2013 » DLG Certificate for ammonia resistant components
Multi-Contact submitted their connectors MC4 und MC4PLUS as well as the Westlake junction box to a voluntary ammonia resistance test run by the DLG. All three components passed the test successfully. The certificate was officially presented at the Eurotier 2012 exhibition in Hanover. The Westelake junction box and the MC4PLUS connector are the first of their kind worldwide to receive the double recognition for 1500 VDC (IEC) / 1000 VDC (UL).
DLG Certificate for ammonia resistant components
07.02.2013 » Multi-Contact opens PV-specific website
With a new PV-themed website Multi-Contact addresses the various players of the photovoltaic industry and simplifies their search for suitable products. Multi-Contact’s new PV portal makes it easier for module manufacturers, inverter manufacturers and solar installers to get an overview of the company’s broad product range and to quickly identify the products best suited for their respective requirements. Requests submitted through the contact form are directly forwarded to the PV department, saving time and effort. We invite you to our new website:
Multi-Contact opens PV-specific website
30.10.2012 » MPC meets future European fire safety standard
The modular MPC plug connector from Multi-Contact meets the requirements of the future European fire safety standard CEN/TS 45545-2:2012 for hazard level R23 HL2 when used outdoors. The different fire safety requirements for rail vehicles that have applied to date for the individual European nations will in future be replaced by a single European standard CEN/TS 45545- 2:2012.
MPC meets future European fire safety standard
25.10.2012 » New high-performance Multilam LA-CUDD
The new, compact high-performance Multilam LA-CUDD from Multi-Contact has outstanding current load capacity and is resilient to short-circuits. Optimum contact and sliding force design, the special contact geometry and the spring mechanism ensure long-lasting, reliable contacts. The outstanding electrical and mechanical properties of the new LA-CUDD Multilam contacts are setting new standards for high-current contact elements. The very low contact resistance and very high conductance of the Multilam contacts permits nearly loss-free power transmission and thus low heat generation at the point of contact.
New high-performance Multilam LA-CUDD
24.10.2012 » Westlake-V junction box passes UL tests
In addition to the TÜV certification for a rated voltage up to 1000V, Multi-Contact’s junction box Westlake with vertical connection geometry (PV-JB/WL-V) has now also successfully passed the UL tests for up to 1000V. The installation of the Westlake is easy and safe, thanks to silicone assembly with prefixing tapes. They prevent the junction box from moving out of place while the silicone filling is drying. The vertical connection geometry meets the most common connection requirements of crystalline modules.
Westlake-V junction box passes UL tests
25.09.2012 » New railway video
Discover our new railway - MPC (Modular Power Connector) video.
New railway video
23.08.2012 » Multi-Contact UK expands to larger premises
Having outgrown its old premises, Multi-Contact UK has moved to a bigger and better building. Remaining in Milton Keynes, its new location is only a few hundred metres up the road. The two-storey building has been fitted with a state of the art vertical lift which provides automated stock storage and retrieval. A purpose built video conference suite is also included that will enhance communication with customers and with Multi-Contact’s head office in Switzerland.
Multi-Contact UK expands to larger premises
06.08.2012 » Modular Power Connector MPC meets IP69K
Multi-Contact’s Modular Power Connector (MPC), specifically designed for the harsh environment of railway applications, now fulfils the highest protection class IP69K according to DIN 40050-9. It is thus suited for cleaning processes with high-pressure jets and at high temperatures. The MPC also fulfils protection classes IP66 and IP67. The modular connector system has been developed for the transmission of power in the electric propulsion system of rolling stock.
Modular Power Connector MPC meets IP69K
02.07.2012 » Primary Circuit Connector RobiFix UL recognized
The latest primary circuit connector RobiFix by Multi-Contact has been UL recognized since January 2012. Particularly compact, energy efficient and user-friendly, RobiFix is one of only a few connectors for the automotive industry to fulfil the requirements for a UL-recognition. For further details please refer to
Primary Circuit Connector RobiFix UL recognized
20.06.2012 » MC4 system new with protection class IP68
Multi-Contact’s photovoltaic connectors MC4 and MC4PLUS have recently been certified for protection class IP68. With the highly efficient, TÜV and UL certified connectors, the entire PV installation may be cabled consistently with a single system. The pre-assembled MC4PLUS (1500 VDC TÜV / 1000 VDC UL) is partucularly suited for module manufacturers and for installations with large cable cross sections. The original MC4 (1000 VDC TÜV / 600 VDC UL) has proven successful during the past 10 years in installations worldwide; it is available pre-assembled as well as for on-site assembly.
MC4 system new with protection class IP68
18.06.2012 » PV components tested for ammonia resistance
Multi-Contact’s PV connector MC4 and the crystalline junction box Westlake have recently successfully passed the ammonia resistance test run by the DLG. In rural areas, solar systems are being widely used. PV modules on the roofs of barns and stables are a common form of solar installations. In this surrounding, the modules are exposed to harsh environmental conditions.
PV components tested for ammonia resistance
15.06.2012 » High performance PV connector internationally recognized
With the MC4PLUS, Multi-Contact introduced a PV connector to the market which is especially designed for internationally operating module manufacturers. The MC4PLUS ist the first connector worldwide to be recognized for both 1500 VDC TÜV and 1000 VDC UL. With these performance parameters the connector is able to meet new demands evoked by permanently increasing cable cross sections. By adding the MC4PLUS connector to the original MC4 system, Multi-Contact broadens the portfolio by an automatically assembled connection solution which can be produced at low cost with consistant high quality.
High performance PV connector internationally recognized
13.06.2012 » Junction box Westlake now IEC certified for 1500 VDC
With double-certification 1500 VDC IEC and 1000 VDC UL, Multi-Contact’s PV junction box Westlake (PV-JB/WL-H) is suited for global use on high performace PV modules. The Westlake is a particularly flat-built box, which can be installed directly underneath the module frame. This eliminates the need to bend the connecting ribbons, saving valuable time in the installation process. Ribbon termination is achieved by clamping, welding or soldering.
Junction box Westlake now IEC certified for 1500 VDC
10.02.2012 » MC4PLUS now UL 1000V recognized
Multi-Contact’s new PV connector MC4PLUS, originally rated for 600V, is now UL recognized for a rated voltage of 1000V and fulfills the IEC standards for 1000V and 1500V (depending on the cable selection). More detailed information can be found under UL file no. E343181.
MC4PLUS now UL 1000V recognized
01.02.2012 » 50 Years of Multi-Contact!
In 2012 we celebrate our 50th company anniversary. We’d like to take this opportunity to thank all our customers, partners and co-workers for the successful cooperation to date. Multi-Contact began as a family business in 1962 in Basle, and has since grown into a leading international electrical connectors manufacturer, operating business units all over the world. The company's success is based on a groundbreaking invention of it's founder, Rudolf Neidecker – the MC Multilam.
50 Years of Multi-Contact!
11.11.2011 » Solution navigator
This solution navigator is our new tool that acts like an enhanced application explorer. With it you can: Find concrete solutions for your applications down through our product range View related information about our component range, specifications and benefits Direct downlad of specific catalogues Discover our success stories In other words, this leads into an improved overview and a better understanding of our market applications. Interactive and fast navigation:
<a href="http://www.multi-contact.com/markets/display.php?appl=29">Solution navigator</a>
08.11.2011 » New plugin 2/2011
Right on top: renewable energy Smart junction boxes - The next generation E-mobility - In the fast lane New national company - MC Brazil
New plugin 2/2011
17.10.2011 » Junction box Westlake TÜV and UL certified
Shortly after receiving the TÜV certification Multi-Contact’s junction box Westlake (PV-JB/WL-H) has now also been recognized by UL. The Westlake is available in a 10A and 12A version, and conforms to protection category IP65. The flat design of the box enables it to be installed directly under the module frame structure. This saves valuable time in the installation process, since it eliminates the need to bend over the ribbon conductors.
Junction box Westlake TÜV and UL certified
05.09.2011 » New Power Connector 21BV by Multi-Contact
Multi-Contact presents a new connector in the 3 Powerline. The single pole, insulated Ø 21mm round connector complements the well established 10BV and 16BV systems, adding to the program a particularly powerful solution with current carrying capacity up to 800A. The new 21BV series is intended for use in mobile power generators, mobile emergency power systems, event cabling, production test facilities and other applications where copper conductors need to be connected and/or contact needs to be made between conductor and panel receptacle. An innovative, smart bayonet locking system simplifies the handling.
New Power Connector 21BV by Multi-Contact
02.09.2011 » Green Technology for a Green Community
Multi-Contact USA celebrated new home in Windsor, California with official ribbon-cutting ceremony and a public open house event. In February 2011, Multi-Contact USA moved in to its new greater quarters in the Town of Windsor. Due to its rapidly expanding manufacturing capabilities in North America and the significant increase in their workforce over the years, the move to this 42,000-square foot facility was the right choice. To celebrate this milestone, MC-USA hosted a private opening ceremony in April that included Multi-Contact’s senior management, as well as members from the Stäubli Group management and board.
Green Technology for a Green Community
26.07.2011 » The MC4 with a Plus
Multi-Contact’s pre-assembled photovoltaic connector MC4PLUS is now TÜV certified up to DC 1500V. The MC4PLUS has been designed particularly for automated assembly, therefore enabling more efficient production processes. The compact connector with cables of cross-sections from 1.5 to 6mm2 is TÜV and UL recognized and intermateable with the original MC4.
The MC4 with a Plus
31.05.2011 » Multi-Contact and Shoals join forces in a ground-breaking project
Shoals Technologies Group and Multi-Contact AG have collaborated to bring the best offer of both companies to PV customers globally by introducing the Multi-Link product line to the market. Multi-Contact and Shoals today announced their collaboration on a new PV product line called Multi-Link. This new product line will allow either the panel manufacturer or the field integrator/end user to adapt the module to create a custom solution based on the needs of the installation. The most innovative feature of the Multi-Link line is the universal interface allowing for modular DC/DC optimization, DC/AC conversion, while also having the ability to act as a standard junction box when no power electronics are required.
Multi-Contact and Shoals join forces in a ground-breaking project
23.05.2011 » Dual certification for MC4PLUS
Multi-Contact’s pre-assembled PV connector MC4PLUS has recently been recognized by both TÜV and UL. It is a cost-efficient connection solution for module manufacturers, as the connector is assembled automatically. It can be produced efficiently at high quality. The compact MC4PLUS with cables in cross sections from 1.
Dual certification for MC4PLUS
05.04.2011 » New plugin 1/2011
Safety first! Environmental management: ISO 14001 certificate Application: CombiTac in medicine Product-Highlights: Everything for your safety
New plugin 1/2011
25.03.2011 » ISO 14001: Multi-Contact is committed to sustainability
Ecological awareness is an essential part of Multi-Contact’s corporate identity. The Swiss connector manufacturer provides its customers with particularly energy-efficient, long lasting electrical connections, thanks to the MC Multilam Technology. Multi-Contact connectors thus contribute largely to saving ressources in the respective fields of application. With the MC3 and MC4 connector systems Multi-Contact is leading in the Photovoltaic sector worldwide.
ISO 14001: Multi-Contact is committed to sustainability
24.03.2011 » MessTec & Sensor Masters Award 2011
“bronze” for Multi-Contact’s new test probe
Multi-Contact’s reversible test probe XSAP-4 is one of the winners of this year’s MessTec & Sensor Masters Award. In the category test & measurement, the new probe won third place. The new XSAP-4 fulfills the latest requirements of the IEC/EN 61010-031 standard, which defines new regulations for the maximum length of blank test probes: in test categories CAT III and IV, the maximum length is 4 mm, in CAT II up to 19 mm are permitted.
MessTec & Sensor Masters Award 2011<br>“bronze” for Multi-Contact’s new test probe
23.03.2011 » Earthquake in Japan: Charity donation
On March 11, 2011, a massive earth quake shook Northeastern Japan, resulting in heavy loss of life and property. The Management of Stäubli and Multi-Contact is deeply saddened by this disaster. As per the information received from the Stäubli business Unit in Osaka as well as our representative in Yokohama, we are glad to confirm that none of our colleagues, partners and customers have been hurt. On behalf of our employees worldwide, we offer our deepest sympathy and condolences to those impacted by this earth quake.
Earthquake in Japan: Charity donation
09.03.2011 » Messzubehör von Multi-Contact für den
MessTec & Sensor Masters Award 2011 nominiert
Die umschaltbare Prüfspitze XSAP-4 von Multi-Contact ist für den diesjährigen MessTec & Sensor Masters Award, Rubrik Test & Measurement, nominiert worden. Die Auszeichnung wird jährlich von der Fachzeitschrift messtec drives Automation vergeben. In der Februar-Ausgabe wurden die nominierten Produkte vorgestellt. Bis einschliesslich 11.
Messzubehör von Multi-Contact für den<br>MessTec & Sensor Masters Award 2011 nominiert
19.01.2011 » Annual theme for 2011: On the safe side!
Every year Multi-Contact comes up with a motto, which is used e.g. for advertisements and trade shows. The concept has been applied successfully in Germany over the past two years, and will be implemented globally starting 2011.
Annual theme for 2011: On the safe side!
18.01.2011 » Multi-Contact USA is moving
The relocation of MC USA from Santa Rosa to the neighbouring town of Windsor is scheduled for February 2011. The recently rented 43,000 square-foot building provides a lot more space. It is located right at the Town Green in old Downtown, only a few minutes’ drive from the current office. The main reasons for the change are the increasing demand for solar components and the rapidly grown number of staff.
Multi-Contact USA is moving
07.09.2010 » New plugin 2/2010
Off to new shores together! Education in Europe - The future of the industry Projects in Haiti & Cambodia - The sun brings hope New office - Xi'an, China
New plugin 2/2010
05.07.2010 » Action against plagiarists at the Intersolar Europe
At the world‘s largest PV exhibition in Munich, Germany, this year Multi-Contact successfully continued the actions against illegal product copies. Legal action was taken against two distributors and one manufacturer of counterfeit products directly on-site. With two companies, an out-of-court settlement was reached. Illegal product copies deliberately mislead the customer.
Action against plagiarists at the Intersolar Europe
08.06.2010 » Multi-Contact at the Intersolar 2010
Multi-Contact again exhibits at the Intersolar Europe, taking place from 9 - 11 June 2010 at the Neue Messe München. Stand C4-582 This year, we are pleased to present you a number of new products from our PV product line, including: - the new generation of PV connectors - new junction boxes for crystalline and thin-film panels Further, we are happy to inform you about the manyfold possibilities of customized solutions, based on the unique MC Multilam Technology. As leading manufacturer of photovoltaic connector systems who pioneered in this field, Multi-Contact had again the opportunity to participate in a PV study by the German CleanTech Institute DCTI, receiving the official CleanTech certificate.
Multi-Contact at the Intersolar 2010
07.06.2010 » Multi-Contact at the AUTOMATICA 2010
Multi-Contact again exhibits at the International Trade Fair for Automation and Mechatronics AUTOMATICA, taking place at the Neue Messe München from 8 - 11 June. Participating in the initiative „Green Automation“, we will show you the advantages of our unique, particularly energy-efficient MC Multilam Technology in regard to resource-saving, environmentally sound automation. We are pleased to present you the new, user-friendly connector FL3-Servo-Power-6+PE, an addition to our Dockingline product range. The simplified handling, thanks to interchangeable contact inserts, saves time during maintenance and repair.
Multi-Contact at the AUTOMATICA 2010
17.05.2010 » New CombiTac module for data transfer
The modular connector system CombiTac by Multi-Contact has been enriched by a new optical fibre connector for data transfer. The new component was introduced to the public at the Hannover Messe 2010, and was met with great interest by the professional visitors. Glass Optical Fibre (GOF) New 4-pole connector for Ø 3mm mono- or multi-mode optical fibre. Fibre types:
New CombiTac module for data transfer
10.05.2010 » New high current module for MC CombiTac
Multi-Contact has developed a new Ø 12mm connector for high current applications for the modular connector system CombiTac. The new connector was first presented to the public at the Hannover Messe 2010. Connector CT-12mm The new Ø 12mm connector with silver plated contact has been particularly designed for high current applications up to 292A. For either crimp termination or metric thread termination using a cable lug on to flexible copper cable.
New high current module for MC CombiTac
03.05.2010 » Multi-Contact opens new office in Russia
This Monday, May 3rd, the new Multi-Contact sales team in St. Petersburg, Russia, has officially started their work. Visitors of the Exporail 2010 in Moscow already had the opportunity to meet them in person in March this year. The new office is supposed to strengthen our presence and increase our recognition in the growing Russian market.
Multi-Contact opens new office in Russia
19.04.2010 » New test probe generation Isoprobe IV
With the new Isoprobe IV series, Multi-Contact offers reliable oscilloscope probes in compact design. New generation of test probes is an addition to the touch protected MC high frequency program. The greatly reduced size of this new product substantially facilitates the conduct of measurements in a restricted space, while maintaining the good electronic characteristics of MC Isoprobe test probes. Thanks to a high frequency range up to 500 MHz with touch protection up to 300V, CAT III, the Isoprobe IV test probes are particularly suited for electronics engineers, while the probes of the Isoprobe II and Isoprobe III series are designed primarily for electricians.
New test probe generation Isoprobe IV
18.04.2010 » Test leads with new Ø 4mm stackable plug
Multi-Contact test accessories stand for safety and reliability, and have proven their worth many times in daily use. Now we have added a new type of test leads to our broad product range. The test leads XVF/XVS-4075 are equipped with a new Ø 4mm stackable plug. The plug part with lamella, the rear socket and the connection port is a one piece construction offering a particularly low contact resistance.
Test leads with new Ø 4mm stackable plug
17.04.2010 » New CombiTac module for high voltages
At the Hannover Messe 2010, Multi-Contact will introduce a new high voltage component for the modular connector system CombiTac. The rated voltage from pole to pole is 5 kV and from pole to the neutral conductor 2,9 kV. Typical applications include testing stations requiring high voltages and a high number of mating cycles. Other areas of application are tool changing systems for injection moulding machines, pulsed applications, and medical equipment.
New CombiTac module for high voltages
11.03.2010 » New plugin 1/2010
Focus on Green energy MC UK - Tidal power & electric trucks. Interview MC USA - What to expect of the new “Green Deal”? New Unit - St. Petersburg, Russia.
New plugin 1/2010
08.03.2010 » MC Czech Republic: new address
On March 1st, 2010, Multi-Contact Czech Republic relocated to a new office. The 1000m2 building hosts offices for both Multi-Contact and Stäubli as well as extended storage space, allowing us to respond more quickly to sales orders. Moreover, there is a large meeting room for up to 20 people, a show room for connectors (Electri-cal and Fluid), and a training room for Stäubli’s robotic division with robots for training and testing purposes. The new setting is well suited for customer appointments, product trainings and presentations.
MC Czech Republic: new address
10.02.2010 » New MC Website
In order to complete the implementation of the new corporate design in correspondence with the Stäubli Group, the company website has been completely re-designed and updated. It now also features the characteristic red bar on white background. The new site is based on the latest technology, and the clear navigation allows quick orientation for the visitor. The latest news and upcoming trade shows are now located on the front page, next to a direct link to current job offers.
New MC Website
14.01.2010 » The New Challenge: Quality and Price
After a difficult business year 2009 with heavy declines in the solar market in the first half of the year and a noticeable relaxation in the second half, many experts predict a revival of the industry for 2010 and beyond. The Multi-Contact Deutschland GmbH (MC) also expects positive developments in the PV market, and anticipates new challenges. An interview with the Key Account Manager for photovoltaics, Matthias Mack.
The New Challenge: Quality and Price
03.12.2009 » USA: Meeting the demand for solar connector systems
Stäubli completes expansion of its production facility in the USA with capacities for manufacturing Multi-Contact PV connectors. The Stäubli Group has completed the expansion of its Duncan plant in South Carolina / USA. The occasion has been celebrated on October 29th with a ribbon cutting ceremony in the presence of Stäubli Group CEO Rolf Strebel, Stäubli Corporation CEO Yves Stäubli and Multi-Contact CEO Franco Delvecchio.
USA: Meeting the demand for solar connector systems
27.11.2009 » Overwhelming response at the SPS/IPC/DRIVES
During the first two days, the participation in the SPS exhibition in Nuremberg, Germany, has already proven successful. Our sales team reports great positive response from the visitors. The number of visitors at our booth is significantly higher than in 2008; on the first day alone we recorded an increase of 50%. We have been anticipating many visitors, but this result exceeds our expectations.
Overwhelming response at the SPS/IPC/DRIVES
05.10.2009 » New plugin 2/2009
MC connects Europe's highest solar installation. Well done! - Award for Solton. Steps against plagiarism - MC sues product pirates. New Products - Railwayline, Aeroline & Test&Measureline.
New plugin 2/2009
03.08.2009 » MC Products on Top
Europe’s highest solar power station at the „Matterhorn Glacier Paradise“ near Zermatt, Switzerland, employs Multi-Contact junction boxes and connectors. 108 solar panels by 3S Swiss Solar Systems are built into the south front of the new, environmentally compatible restaurant on top of the Klein Matterhorn. For the cabling of the installation at 3840m 3S chose MC junction boxes PV-JB/2 and MC4 connectors. Thanks to the high sun intensity and additional refl exion by snow, the alpine location offers ideal conditions for a photovoltaic installation.
MC Products on Top
29.07.2009 » 30th anniversary MC Deutschland GmbH
Last Saturday, on July 25, 2009 the Multi-Contact Deutschland GmbH celebrated their 30th anniversary with an open day. Roughly 350 visitors took the chance to have a closer look at Multi-Contact and took part in guided tours of the company. In a small exhibition the history of Multi-Contact worldwide, and the Multi-Contact Deutschland GmbH in particular, was documented in a time line. Beautiful weather and an entertaining programme added to a great atmosphere for everyone.
30th anniversary MC Deutschland GmbH
15.06.2009 » New Applications Flyer
Connection Solutions for Aerospace. Rack & Panel connection Solutions. Electrical Contacts from AWG26 to AWG0000. Power distribution and relay sockets.
New Applications Flyer
11.06.2009 » Official opening event at MC Essen on June 19
Official opening of the new building at MC Essen. On Friday, June 19, 2009, an official opening ceremony will be held for the new MC building in Essen, Germany. The construction of the new offices and production hall was finished in December 2008, and the PV installation on the roof was installed. The new production facilities started operating at the beginning of this year.
Official opening event at MC Essen on June 19
10.06.2009 » New office in China
Multi-Contact opens a new office in Wuhan, China. Together with Stäubli’s Connectors and Robotics divisions, Multi-Contact has opened a new office in Wuhan, the capital of China’s Hubei province. Wuhan is a major industrial centre as well as an important transportation hub, and hosts one of China’s leading universities. The local sales team will support the customers proficiently, and allows for personal customer contact as well as shorter response times.
New office in China
09.06.2009 » Intersolar 2009: Multi-Contact tracks down copycats!
Multi-Contact takes action against plagiarism. At this year’s Intersolar in Munich, Germany, the world’s largest trade show for the photovoltaic industry, Multi-Contact again succeeded in tracking down product counterfeiters. Legal action was taken against two manufacturers as well as two providers of illegal MC product copies. In the past, Multi-Contact already won a number of trials against product pirates.
Intersolar 2009: Multi-Contact tracks down copycats!
26.05.2009 » New plugin 1/2009
MC increases production capacities. New Management - Multi-Contact AG Anniversary - 30 Years Multi-Contact Weil Corporate Design - A new Style for MC New Products - Solarline & Slide-inline
New plugin 1/2009
23.03.2009 » 150 Million MC photovoltaic connectors sold!
Multi-Contact has set a new record: the 150millionth PV-connector has just been sold. Being one of the pioneers in providing connector systems for the photovoltaic industry, Multi- Contact looks back on more than 10 years experience on this sector. With MC3 and MC4 we offer a series of high-quality connector systems for PV modules of various kinds.
150 Million MC photovoltaic connectors sold!
02.12.2008 » The new Building in Germany nears completion ...
The new Building in Germany nears completion ...
24.11.2008 » MC-Management will be amended as of January 2009
Mr. Philippe GRUNENBERGER will be attending to the tasks of Vice President Sales & Marketing as Mr. Franco Delvecchio's successor who is attending the MC-Group CEO's tasks since September 2008. Philippe Grunenberger joined MC-Allschwil in September 1987 as Design Engineer.
MC-Management will be amended as of January 2009
13.11.2008 » Extension of Duncan facility
Production of solar connector systems in the United States. November 2008 - Stäubli announces the expansion of its Duncan site in South Carolina / United States. The new facility will host the production of electrical connector systems for the rapidly expanding solar power market. In addition, Stäubli will start the assembly of tool changers for the automation industry as well as electromagnetic quick mold clamping systems for the North American plastic market.
Extension of Duncan facility

© 2013 Multi-Contact AG - All Rights Reserved.
Imprint | Sitemap | last change:
IE >= 6.0 | FireFox >= 2.0